SC&RA launches Uniform Permit Transport 2021
Goal is for 100 per cent compliance by 2021.
March 27, 2018 By SC&RA
The Specialized Carriers & Rigging Association is pleased to announce an ambitious initiative, Uniform Permit Transport 2021 (UPT2021), to establish harmonization between all 50 U.S. states on overweight/oversize envelope vehicle configurations.
Each day in the U.S., oversize and overweight trucks travel across state lines but experience different requirements and weight allowances in each, leading to delays and added costs to consumers. SC&RA’s UPT2021 will advocate for widespread acceptance of more comprehensive and representative permitted weight configurations issued under routine or auto-issued permits.
Two of the primary goals for UPT2021 are to encourage all states to allow minimum weight thresholds, and to analyze and issue permits via automated permit systems, 24-7. More than 30 states presently use systems that auto-issue permits, in some cases greater than 16 feet wide and high and 250,000 gross pounds.
The aim is to gain 100 per cent compliance across the country by the year 2021. Complete details, including charts and configurations, can be found here.
SC&RA has proposed 11 envelope vehicle configurations that make up the majority of typical overweight permits issued by states in the U.S. The 11 selected configurations are already approved in several states.
This initiative pertains only to those loads defined by the Federal Government as “non-divisible” loads which are loads that cannot be dismantled in less than eight hours, or if dismantled, would compromise the intended use of the vehicle or destroy the value of the load. Typical non-divisible loads include items such as construction equipment, bridge beams and transformers.
“Lack of uniformity amongst states is costing our member companies millions of dollars annually,” said SC&RA vice-president Steven Todd. “Manufacturers pay more for transporting their products and those costs are passed along to consumers. Ultimately, it’s nearly every citizen/taxpayer bearing the burden.”
According to SC&RA and industry representatives, automating the permitting process has several benefits, not the least of which is safer roads for all motorists as higher percentages of users legally obtain and run on state-issued permits. Other benefits include increased revenue for states to be used on infrastructure due to the higher volume of permits being issued.
“Beyond the consumer, the lack of uniformity among states permitted weight allowances has a very real impact on the nation’s infrastructure as oversize/overweight loads are re-routed thousands of additional miles, causing more stress on roads and bridges,” explained Todd. “This is why SC&RA is committed to working towards uniformity in allowable permitted weight configurations. UPT2021 is one of the most important initiatives we’ve undertaken because, while the goal of uniformity across 50 states is possible, it’s formidable. But the consequences of doing nothing are no longer tolerable.”
The Specialized Carriers & Rigging Association (SC&RA) is an international trade association of more than 1,360 members from 46 nations. Our members are involved in specialized transportation, crane and rigging operations, machinery moving and erecting, industrial maintenance, millwrighting, manufacturing, and rental services. SC&RA helps members run more efficient and safer businesses by monitoring and affecting pending legislation and regulatory policies at the state and national levels; researching and reporting on safety concerns and best business practices; and providing five yearly forums where these and other relevant member issues can be advanced.
Print this page